Kia Cadenza YG: Evaporative Emission Control System / On-board Refueling Vapor Recovery (ORVR) valve Description and Operation
| Operation |
| Normal status | Full fuel | Vehicle Rollover / steep |
| Valve open | Valve close | Valve close |
|
|
|
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the ventilation hose (A) from the fuel tank air filter.
Removal 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel tank. (Refer to Fuel System - "Fuel Tank") 3.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Surround View Monitoring Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") 3. Remove the SVM unit (B) after disconnecting the connectors (A) and mounting bolts. Installation 1. Install the SVM unit.
Kia Cadenza YG 2016-2021 Service Manual: Photo Sensor Repair procedures
Inspection 1. Ignition "ON" 2. Using the scan tool. 3. Emit intensive light toward photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and reduce with lower intensive light.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Specifications
- Timing Chain Repair procedures
- Body (Interior and Exterior)
- New on site
- Most important about car
