Kia Cadenza: Manual heating and air conditioning / Fan speed control
![](images/fan_speed_control-1069/904/pages.36(1).jpg)
The fan speed can be set to the
desired speed by operating the fan
speed control switch.
To change the fan speed, raise the
switch for higher speed or depress the
switch for lower speed. To turn the fan
speed control off, press the front
blower OFF button.
This is used to select the outside
(fresh) air position or recirculated air
position.
To change the air intake control position,
push the control button.
Outside (fresh) air position
With ...
Press the A/C button to turn the air
conditioning system on (indicator
light will illuminate).
Press the button again to turn the air
conditioning system off.
WARNING - Reduced
Visibility
...
Other information:
Valve Clearance Inspection And Adjustment
Inspect and adjust the valve clearance when the engine is
cold (Engine coolant temperature : 20°C(68°F)) and cylinder head is
installed on the cylinder block.
1.
Remove the cylinder head cover.
(Refer to Cylinder H ...
Components
1. Front housing2. Planet gear shaft assembly3. Lever4. Lever packing5. Starter solenoid assembly6. Packing7. Planet gear 8. Shield9. Armature assembly10. York assembly11. Brush holder assembly12. Rear housing13. Through bolt14. Lever plate
...