Kia Cadenza: Manual heating and air conditioning / Air conditioning

Kia Cadenza YG 2016-2025 Owners Manual / Features of your vehicle / Automatic climate control system / Manual heating and air conditioning / Air conditioning

Press the A/C button to turn the air conditioning system on (indicator light will illuminate).

Press the button again to turn the air conditioning system off.

WARNING - Reduced Visibility

Continuous use of the climate control system in the recirculated air position may allow humidity to increase inside the vehicle which may fog the glass and obscure visibility.

WARNING - Recirculated Air

Continued use of the climate control system in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible while driving.

WARNING - Sleeping with AC on

Do not sleep in a vehicle with the air conditioning or heating on as this may cause serious harm or death due to a drop in the oxygen level and/or body temperature.

Fan speed control
The fan speed can be set to the desired speed by operating the fan speed control switch. To change the fan speed, raise the switch for higher speed or depress the switch for lower speed. To ...

OFF mode
Press the front blower OFF button to turn off the front air climate control system. However, you can still operate the mode and air intake buttons as long as the Engine Start/Stop button i ...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: Description and Operation


Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable. When the ignition key is turned to the start position, current flows and energizes ...

Kia Cadenza YG 2016-2025 Service Manual: Variable Intake Solenoid(VIS) Actuator Repair procedures


Removal and Installation VIS 1 [Intake Manifold] 1. Disconnect the battery "-" terminal. 2. Remove the engine cover. 3. Disconnect the VIS actuator hose (A). 4. Remove the VIS actuator (B). Tightening torque : 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft) 5. Insta ...

Copyright © www.kcadenzavg.com 2017-2025