Kia Cadenza: Exterior / Fender Repair procedures

Kia Cadenza YG 2016-2025 Service Manual / Body (Interior and Exterior) / Exterior / Fender Repair procedures

Replacement
   
Be careful not to damage the fender and body.
When removing the clips, use a clip remover.
1.
Remove the front bumper.
(Refer to the BD group - "Front Bumper")
2.
Remove the head lamps.
(Refer to the BE group - "Head Lamps")
3.
Loosen the mud mounting screws.

4.
After loosening the mounting screws and clips, then remove the side sill garnish (A).

5.
After loosening the fender mounting bolts and nut, then remove the fender (A).

6.
Installation is the reverse of removal.
Exterior
...

Hood Repair procedures
Replacement Hood Assembly Replacement     • When removing and installing the hood, an assistant is necessary. • Be careful not to damage the hood and ...

Other information:

Kia Cadenza YG 2016-2025 Owners Manual: Instrument Cluster Control


Adjusting Instrument Cluster Illumination The brightness of the instrument panel illumination is changed by pressing the illumination control button (“+” or “-”) when the ENGINE START/STOP button is ON, or the taillights are turned on. If you hold the illumination contro ...

Kia Cadenza YG 2016-2025 Service Manual: Fuel Filler Door Release Actuator Repair procedures


Inspection 1. Open the fuel filler door and remove the fuel filler door release actuator (A) after loosening the mounting bolts. 2. Remove the trunk room left side trim. (Refer to Body - "Interior Trim") 3. Disconnect the release actuator connector (A). 4. Check for continuity betwe ...

Copyright © www.kcadenzavg.com 2017-2025