Kia Cadenza: Light bulbs / Front side marker (LED type)
bulb replacement
.jpg)
If the front side marker (LED type)
(1) does not operate, have the vehicle
checked by an authorized Kia
dealer.
The LED lamp cannot be replaced
as a single component because it is
an integrated unit. The LED lamp has
to be replaced with the unit.
A skilled technician should check or
repair the front side marker (LED
type), for it may damage related
parts of the vehicle.
If the position lamp (LED type) (1)
does not operate, have the vehicle
checked by an authorized Kia dealer.
The LED lamp cannot be replaced
as a single component because it is
an integrated ...
If the front turn signal lamp (Bulb
type) (1) does not operate, have the
vehicle checked by an authorized Kia
dealer. ...
Other information:
Specifications
ItemSpecificationMaster cylinderCylinder I.D.Ø 22.22 mm (0.857 in)Piston stroke45±1 mm (1.77 ± 0.039 in)Fluid level switchProvidedBrake boosterType11" SingleBoosting ratio9:1Front disc brakeTypeVentilated discDisc O.D.Ø 320 mm (12.60 in)Disc thickness28 mm (1.10 in)Caliper pi ...
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the rear shock absorber.
(Refer to Rear Susp ...