Kia Cadenza: Lighting / Headlight leveling device
Automatic type
To ensure the proper headlight beam
is used under various conditions, the
headlight beam levels are automatically
adjusted depending on the
number of passengers, the weight in
the trunk, and other driving conditions.
✽ NOTICE
If it does not work properly even
though your car is inclined backward
according to passenger's posture, or
the headlight beam is irradiated to
the high or low position, have the system
be inspected by an authorized
Kia dealer.
Do not attempt to inspect or replace
the wiring yourself.
This warning message illuminates if
there is a malfunction (burned-out
bulb except LED lamp or circuit malfunction)
with the headlamp. In this
case, have your vehicle inspected by
an autho ...
Windshield wiper/washer
A :Wiper speed control (front)
· MIST – Single wipe
· OFF – Off
· INT – Intermittent wipe
AUTO* – Auto control wipe
· LO – Low wiper speed
· HI – ...
Other information:
Removal and Installation
1.
Remove the lower oil pan.
(Refer to Lubrication System - "Oil Pan")
2.
Remove the oil pump chain cover (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
3.
Remove the bolt (A) and then seperate the chain with sprocket from the oil ...
Component Location
1. Instrument cluster assembly2. Seat belt switch3. Vehicle speed sensor4. Engine coolant temperature sender5. Oil pressure switch6. Brake fluid level warning switch7. Parking brake switch8. Door switch 9. Fuel gauge sender10. Trunk lid open switch11. Wheel speed sensor12. AB ...