Kia Cadenza YG: Automatic Transaxle System / Automatic Transaxle Components and Components Location
| Components |
| 1. Converter housing 2. Automatic transaxle case 3. Rear cover 4. Valve body cover | 5. Manual control lever 6. Air breather hose 7. Inhibitor switch 8. Solenoid valve connector |
Removal 1. Air cleaner assembly and air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Battery and battery tray. (Refer to Engine Electrical System - "Battery") 3.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Compressor Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative cable from the battery. 3. Recover the refrigerant with a recovery/charging station.
Kia Cadenza YG 2016-2021 Service Manual: Blower Unit Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower unit.(Refer to HA group – heater unit). 3. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 3 screws. Make sure that there is no air leaking out of the blower and duct joints.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Components and Components Location
- Specifications
- Crankshaft Damper Pulley Components and Components Location
- New on site
- Most important about car
