Kia Cadenza YG: Rear Parking Assist System / Specifications

Kia Cadenza YG 2016-2021 Service Manual / Body Electrical System / Rear Parking Assist System / Specifications

Specification
Item
Specification
Ultrasonic sensor
Voltage rating
DC 12 V
Detecting range
30 cm ~ 120 cm
Operation voltage
DC 9 ~ 16 V
Operation current
MAX 300 mA
Operation temperature
-30°C ~ +80°C (-22°C ~ +176°C)
Operation frequency
48 ± 5 KHz
Effective operating velocity
10 KPH (6.2 MPH)
Number of sensors
4 (Left side, Left center, Right center, Right side)

※ Rear parking assist control unit function is built in IPM (Intelligent integrated Platform Module).

    Component Location 1. BCM (Body Control Module)2. Ultrasonic sensor ※ Rear parking assist control unit function is built in IPM (Intelligent integrated Platform Module).

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Ambient Sensor Repair procedures

    Inspection 1. Ignition "OFF" 2. Disconnect ambient temperature sensor. 3. Check the resistance of ambient temperature sensor between terminals 1 and 2 whether it is changed by changing of the ambient temperature. 1. Sensor Ground2.

    Kia Cadenza YG 2016-2021 Service Manual: Blower Unit Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower unit.(Refer to HA group – heater unit). 3. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 3 screws.     Make sure that there is no air leaking out of the blower and duct joints.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0191