Kia Cadenza YG: Starting System / Starter Description and Operation

Kia Cadenza YG 2016-2021 Service Manual / Engine Electrical System / Starting System / Starter Description and Operation

Description
The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and energizes the starter motor''s solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns.

    Troubleshooting     • The battery must be in good condition and fully charged for this troubleshooting.

    Specification Starter ItemSpecificationRated voltage12 V, 1.7 kWThe number of pinion teeth12Performance[No-load, 11.5 V]AmpereMax.85 ASpeedMin. 2,550 rpm

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Schematic Diagrams

    Circuit Diagram SVM System Input/Output 1. Camera input ItemSpecificationLens angle of view190 degreesAngle of viewHorizontal186 degreesVertical135 degreesFunctionProvides the original image of the wide angle image (no additional function)Application locationSame camera applied to the front, rear, left and right 2.

    Kia Cadenza YG 2016-2021 Service Manual: Climate Control Air Filtar Repair procedures

    Replacement 1. Disconnect the damper (B) from the glove box (A) and then remove the glove box lift (C). 2. Remove the filter cover (A) with pushing the knob. 3. Replace the air filter (B), install it after making sure of the direction of air filter.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0217