Kia Cadenza: Lighting / Lighting control
.jpg)
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of the following positions:
(1) OFF position
(2) Auto light position
(3) Parking & Tail light
(4) Headlight position
.jpg)
.jpg)
When the light switch is in the parking light position, the tail, license and instrument panel lights will turn ON.
.jpg)
When the light switch is in the headlight position, the head, tail, license lights will turn ON.
✽ NOTICE
The Engine Start/Stop button must be in the ON position to turn on the headlights.
Auto light position
.jpg)
When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside of the vehicle.
CAUTION
- Never place anything over the sensor (1) located on the instrument panel, this will ensure better auto-light system control.
- Don’t clean the sensor using a window cleaner, the cleaner may leave a light film which could interfere with sensor operation.
Headlight escort function
If you turn the Engine Start/Stop button
to the ACC or OFF position with
the headlights ON, the headlights
remain on for about 5 minutes.
However, if the driver's door is
opened and closed, ...
High beam operation
To turn on the high beam headlamp,
push the lever away from you.The lever
will return to its original position. The
high beam indicator will light when the
headlight high beams are switched ...
Other information:
Kia Cadenza YG 2016-2024 Owners Manual: Temperature control
The temperature will increase to the maximum (HI) by raise the toggle switch to the extreme up. The temperature will decrease to the minimum (Lo) by depress the toggle switch to the extreme down. When raise and depress the toggle switch, the temperature will increase or decrease by 1 ...
Kia Cadenza YG 2016-2024 Service Manual: Power Door Lock Switch Repair procedures
Inspection Diagnosis With GDS 1. It will be able to diagnose defects of DDM/ADM with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. 2. Select model and "IPM". 3. Select the "DDM (Power window main)" to check. 4. Select "Input ...
