Other information:
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Measure the resistance between + terminal (9) and - terminal (13).
5.
Check that the resistance i ...
Removal
1.
Turn the ignition switch OFF.
2.
Remove the air duct (B) and air cleaner assembly (A).
3.
Remove the connector and then arrange the wiring harness (A).
4.
Remove the brake fluid from the master cylinder reservoir with a syringe.
•
Be ...