Kia Cadenza: Electro Chromic Inside Rear View Mirror / Repair procedures

Kia Cadenza YG 2016-2025 Service Manual / Body Electrical System / Electro Chromic Inside Rear View Mirror / Repair procedures

Inspection

Check it by the procedure below to see if the function of the ECM is normal.

1.	Turn the ignition key to the "ON" position.

2.	Cover the front sensor to stop functioning.

3.	Shine a light at the rear sensor.

The ECM should be darkened as soon as the rear sensor detects the light.

If this test is performed in daytime, the ECM may be darkened as soon as the front sensor is covered.

5.	When the reverse gear is engaged, the ECM should not be darkened.

6.	When heading lights to both the front and rear sensors, the ECM should not be darkened.

Removal

1.	Remove the mirror wiring cover (A) and disconect mirror connector (B).

2.	Remove the mounting screw (A).

Remove the mirror (A) pulling up in the arrow direction.

Make sure not to damage the mounting bracket when removing the mirror.

Installation

1.	Install the mirror making sure the mounting bracket not to be damaged.

Install the mirror wiring cover after reconnecting the connector and tightening the screw.

–	Make sure the connector is plugged in properly.

Description and Operation

Description The ECM (Electro Chromatic inside rear view Mirror) is for dimming the reflecting light from a vehicle behind at night, in order the user not to be dazzled by the light. The forward ...

Compass Mirror Description and Operation

Function 1. Push the A button lower of the rear view mirror to turn on the function of the compass mirror so that displays a sign of a direction on the small board in the upper-right side of t ...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: Canister Close Valve (CCV) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specification. Specification: Refer to "Specification" 5. Disconnect the vapor hose connected with ...

Kia Cadenza YG 2016-2025 Service Manual: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Specification Item SpecificationControl typeN/H (Normal High)"Control pressure kpa (kgf/cm², psi)""500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)"Current value (mA)50 ~ 850Coil resistance(Ω)5.1 ± 0.3 ...