Other information:
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the accelerator position sensor connector (A).
3.
Remove the installation nuts (B) and bolt (C), and then remove the accelerator pedal module.
Installation
1.
Install in the revers ...
Replacement
1.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3.
Push the pin (A) and then disconnect the airbag module from the steering wheel.
4.
Disconnect ...