Kia Cadenza: What to do in an emergency / Road warning
Hazard warning flasher
.jpg)
The hazard warning flasher serves
as a warning to other drivers to exercise
extreme caution when
approaching, overtaking, or passing
your vehicle.
It should be used whenever emergency
repairs are being made or
when the vehicle is stopped near the
edge of a roadway.
Depress the flasher switch with the
ENGINE START/STOP button in any
position. The flasher switch is located
in the center facia panel. All turn signal
lights will flash simultaneously.
- The hazard warning flasher operates
whether your vehicle is running
or not.
- The turn signals do not work when
the hazard flasher is on.
- Care must be taken when using
the hazard warning flasher while
the vehicle is being towed.
If the engine stalls at a crossroad
or crossing
If the engine stalls at a crossroad or
crossing, set the shift lever in the N
(Neutral) position and then push the
vehicle to a safe place.
If ...
Other information:
Description
•
Torque converter control solenoid valve is a Variable Force Solenoid (VFS) type.
•
When TCM supplies variable current to solenoid valve,
hydraulic pressure of torque converter clutch is controlled by solenoid
valve. ...
Removal and Installation
1.
Remove the engine room front under cover (A) and the side covers (B).
When removing the under covers (B), unfasten the mounting
bracket bolts and then remove the under cover and mounting bracket
assembly.
2.
Install in the reve ...