Kia Cadenza: Smart Cruise Control button and switch / To turn Smart Cruise Control off

Press the CRUISE button. (the CRUISE indicator in the instrument cluster will go off).

When Smart Cruise Control is not needed, press the [CRUISE] switch and deactivate the system.

✽ NOTICE

Take the following precautions:

• If Smart Cruise Control is left on, (cruise indicator in the instrument cluster illuminated) Smart Cruise Control can be activated unintentionally. Keep Smart Cruise Control off (cruise indicator turn off) when Smart Cruise Control is not used.
• Do not leave the vehicle when it is stopped by SCC. If it is necessary to leave the vehicle, turn off SCC and move the gear shift to P (Parking), engage the parking brake, and turn off the engine while depressing the brake pedal.
• Use SCC only on roads with good traffic conditions. Do not use SCC in the following situations because of the high risk of an accident.
  - Highway interchange and tollgate
  - Road surrounded by multiple steel constructions (subway construction, steel tunnel, etc)
  - Parking lot
  - Lanes beside guard rail on a road
  - Slippery road with rain, ice, or snow covered
  - Abrupt curved road
  - Steep hills
  - Windy roads
  - Off roads
  - Rods under construction
  - Rumble strip
  - When driving near crash barriers
  - When the vehicle sensing ability decreases due to vehicle modification that causes a difference in the level of the vehicle's front and rear
  - When driving with limited view (possibly due to bad weather, such as fog, snow, rain or sandstorm)
• Pay particular attention to the driving conditions whenever using Smart Cruise Control.
• Smart Cruise Control is not a substitute for safe driving. It is the responsibility of the driver to always check the speed and distance of the vehicle ahead.
• Be careful when driving downhill using SCC.
• Smart Cruise Control should not be used when the vehicle is being towed.
• Always set the vehicle speed under the applicable speed limit.
• Unexpected situations may lead to accidents. Pay continuous attention to road conditions and your surroundings even when the Smart Cruise Control is operating.

To adjust the sensitivity of Smart Cruise Control

The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted.

Go to the 'User Settings > Driver Assistance > SCC Reaction > Fast/Normal/Slow' on the LCD display.

You may select one of the three stages you prefer.