Kia Cadenza: Smart Cruise Control button and switch / To restart Smart Cruise Control

Kia Cadenza YG 2016-2023 Owners Manual / Driving your vehicle / Smart Cruise Control (SCC) / Smart Cruise Control button and switch / To restart Smart Cruise Control

If any method other than the CRUISE button was used to cancel cruising speed and the system is still activated, the cruising speed will automatically resume when you move the RES+ switch up.

If you move the RES+ switch up the speed will resume to the recently set speed. However, if vehicle speed drops below 5 mph (10 km/h), it will resume when there is a vehicle in front of your vehicle.

✽ NOTICE

To reduce the risk of an accident, always check the road conditions when reactivating the smart cruise control using the RES+ switch to ensure the road conditions permit safe use of the cruise control.

Smart Cruise Control will be temporarily canceled when

Canceled manually Smart Cruise Control is temporarily canceled when the brake pedal is depressed or the CANCEL button is pressed. The speed and headway indicator on the cluster is disappear ...

To turn Smart Cruise Control off

Press the CRUISE button. (the CRUISE indicator in the instrument cluster will go off). When Smart Cruise Control is not needed, press the [CRUISE] switch and deactivate the system. ✽ NOT ...

Other information:

Kia Cadenza YG 2016-2023 Service Manual: Fuel Pressure Control Valve (FPCV) Repair procedures

Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel pressure regulator valve terminals 1 and 2. 4. Check that the resistance is within the specifica ...

Kia Cadenza YG 2016-2023 Service Manual: Power Window Switch Repair procedures

Inspection Driver Power Window Switch 1. When checking the driver power window switch, select a vehicle type and "IPM" menu. 2. Select "DDM (Driver Door Module)". 3. Select option "Input/Output monitoring". 4. To check the input value of power window switch in force mode, select opt ...