Kia Cadenza: Smart Cruise Control button and switch / Smart Cruise Control will be temporarily canceled when

Kia Cadenza YG 2016-2024 Owners Manual / Driving your vehicle / Smart Cruise Control (SCC) / Smart Cruise Control button and switch / Smart Cruise Control will be temporarily canceled when

Canceled manually

Smart Cruise Control is temporarily canceled when the brake pedal is depressed or the CANCEL button is pressed. The speed and headway indicator on the cluster is disappeared and the cruise indicator ( CRUISE) is illuminated continuously.

Canceled automatically

SCC will automatically cancel in the following situations:

Each of these actions will cancel SCC operation. (The set speed of the cluster is displayed in gray shades and the distance indicator with the vehicle ahead is disappeared.)

In a condition the smart cruise control is cancelled automatically, Smart Cruise Control will not operate even though the RES+ or SET- switch is moved.

The EPB (Electronic Parking Brake) is applied when SCC auto release condition occurs while SCC is in use.

CAUTION

If Smart Cruise Control is cancelled by other than the reasons mentioned, have the system checked by an authorized Kia dealer.

CAUTION

If the system is automatically cancelled, the warning chime will sound and a message will appear for a few seconds.

You must adjust the vehicle speed by depressing the accelerator or brake pedal according to the road condition ahead and driving condition.

Always check the road conditions. Do not rely on the warning chime.

To temporarily accelerate with Smart Cruise Control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with SCC operation or change the set speed. To return to ...

To restart Smart Cruise Control
If any method other than the CRUISE button was used to cancel cruising speed and the system is still activated, the cruising speed will automatically resume when you move the RES+ switch u ...

Other information:

Kia Cadenza YG 2016-2024 Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures


Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the specification. Specification: Refer to “Specification” Removal 1. Turn the ignition switc ...

Kia Cadenza YG 2016-2024 Service Manual: Airbag Module Disposal Description and Operation


Airbag Disposal Special tool required Deployment tool 0957A-34100A Before scrapping any airbags or side airbags (including those in a whole vehicle to be scrapped), the airbags or side airbags must be deployed. If the vehicle is still within the warranty period, before deploying the ai ...

Copyright © www.kcadenzavg.com 2017-2024