Kia Cadenza: Smart Cruise Control button
and switch / To temporarily accelerate with
Smart Cruise Control on
If you want to speed up temporarily
when the cruise control is on,
depress the accelerator pedal.
Increased speed will not interfere
with SCC operation or change the
set speed.
To return to the set speed, take your
foot off the accelerator.
If you move the SET- switch down at
increased speed, the cruising speed
will be set again.
WARNING
Be careful when accelerating
temporarily, because the speed
is not controlled automatically
at this time even if there is a
vehicle in front of you.
Follow either of these procedures:
Move the SET- switch down and
hold it. Your vehicle set speed will
decrease by 5 mph (10 km/h).
Release the switch at the speed
you want.
Move th ...
Canceled manually
Smart Cruise Control is temporarily
canceled when the brake pedal is
depressed or the CANCEL button is
pressed. The speed and headway
indicator on the cluster is disappear ...
Other information:
1. Press and release (1), (2) or (3)
button.
2. The indicator (4) and (6) operates
as below:
If the indicator (4) flashes in
Orange, it indicates that the
garage door is "Closing".
If the indicator (4) is ON continuously
in Green, it indicates that
the garage door is "Clos ...
Inspection
1.
Remove the IMS control switch connector (A).
2.
With the IMS control switch in each position, make sure that
continuity exists between the terminals below. If continuity is not as
specified, replace the IMS control switch.
Driver Power Seat Control Switch (For IMS)
Remova ...