Seat belt systems should never be
disassembled or modified. In addition,
care should be taken to assure
that seat belts and belt hardware are
not damaged by seat hinges, doors
or other abuse ...
Other information:
Replacement
1.
Remove the cover (B) and remove the nuts, then remove the wiper arm (A).
Tightening torque :
22.6~26.5 N.m(2.3~2.7 kgf.m, 16.6~19.5 lb-ft)
2.
Detach the clips, then remove the cowl top cover (A).
3.
Installation is the reverse of removal.
...
Inspection
Room Lamp
1.
Check that the switch operates properly after disconnecting the room lamp connector (A).
Removal
Room Lamp
1.
Disconnect the negative(-) battery terminal.
2.
Carefully remove the lens (A) using a small screwdriver.
Take care not to ...