Kia Cadenza: When the lane ahead is clear / Collision Warning

Kia Cadenza YG 2016-2025 Owners Manual / Driving your vehicle / Smart Cruise Control (SCC) / When the lane ahead is clear / Collision Warning

If there is a high risk of collision due to sudden braking of the front vehicle or lack of safety distance with the vehicle ahead during SCC driving, so that if the driver's brake or steering wheel operation is required, the Distance Step with the vehicle ahead will blink on the cluster and a collision warning will sound.

In this case, immediately reduce the speed.

✽ NOTICE

✽ NOTICE

If the vehicle ahead (vehicle speed: less than 20 mph (30 km/h) disappears to the next lane, the warning chime will sound and a message will appear. Adjust your vehicle speed for vehicles or objects that can suddenly appear in front of you by depressing the brake pedal according to the road condition ahead and driving condition.

When the lane ahead is clear
The vehicle speed will maintain the set speed. The vehicle will maintain the set speed, when the lane ahead is clear. The vehicle will slow down or speed up to maintain the sele ...

In traffic situation
Use switch or pedal to accelerate In traffic, your vehicle will stop if the vehicle ahead of you stops. Also, if the vehicle ahead of you starts moving, your vehicle will start as we ...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: CVVT Oil Control Valve (OCV) Repair procedures


Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: Refer to “Specification” Removal [CVVT Oil Control Valve (Inta ...

Kia Cadenza YG 2016-2025 Service Manual: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures


Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Measure the resistance between power terminal (5) and signal terminal (16). Specification : 5.1 ± ...

Copyright © www.kcadenzavg.com 2017-2025