Kia Cadenza: Hydraulic System / Description and Operation

Kia Cadenza YG 2016-2024 Service Manual / Automatic Transaxle System / Hydraulic System / Description and Operation

Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.
Hydraulic System
...

Components and Components Location
Components Location 1. Automatic transaxle2. Valve body assembly3. Oil pump assembly ...

Other information:

Kia Cadenza YG 2016-2024 Service Manual: Fuel Pressure Control Valve (FPCV) Repair procedures


Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel pressure regulator valve terminals 1 and 2. 4. Check that the resistance is within the specifica ...

Kia Cadenza YG 2016-2024 Service Manual: Description and Operation


Description BSD is a system that uses two magnetic wave radar sensors attached on the rear bumper to measure the distance from the following vehicles and provides the sensing and (visual and auditory) alarm of any vehicle coming into the blind spot. – Blind Spot Detection (BSD) : ...

Copyright © www.kcadenzavg.com 2017-2024