Other information:
Inspection
First Seat Heater
1.
Check for continuity and measure the resistance between No.1 and NO.4 terminals.
No.DescriptionNo.Description1Heater (-)3NTC (+)2NTC (-)4Heater (+)
Standard value (Fabric / Leather)
Cushion : 1.04 Ω ± 10%
Back : 1.1 Ω ± 10%
Set : 2.14 Ω ± 10%
...
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the ventilation hose (A) from the fuel tank air filter.
3.
Disconnect the vapor tube quick-connector (B) and the quick-connector (C).
4.
Remove installation bolts (A) and then remove ...