Kia Cadenza: Lane Keeping Assist (LKA) / LKA operation
.jpg)
To activate/deactivate LKA :
With the ENGINE START/STOP button
in the ON position, press the
Lane Safety button located on the
instrument panel on the lower left
hand side of the driver.
The indicator (
) in the cluster
display
will initially illuminate white.
When the indicator(white) was activated
in the previous ignition cycle,
the system turns on without any control.
If you press the Lane Safety button
again, the indicator on the cluster
display will go off.
The color of indicator will change
depend on the condition of LKA.
- White : Sensor does not detect
the lane marker or vehicle
speed is less than 40
mph (60 km/h).
- Green : Sensor detects the lane
marker and system is
able to control the steering.
Lane Keeping Assist detects the lane
markers on the road with a front view
camera at the front windshield, and
assists the driver’s steering to help
keep the vehicle in the lanes. When
t ...
The driver can change LKA to Lane
Departure Warning (LDW) or change
the LKA mode Selecting “Settings >
Vehicle > Driver Assistance > Lane
Safety > Lane Keeping Assist/Lane
Depa ...
Other information:
Component Location
1. Audio unit2. Front tweeter speaker3. Glass antenna amplifier (Diversity type)4. Front door speaker5. Rear speaker6. Antenna feeder cable7. Feeder cable joint connector8. Audio monitor
...
Description
1.
Mode
(1)
Virgin State
•
The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state.
•
In this state, there is no Auto-Location, no sensor wake-up, no sensor monitoring and no DTC monitoring..
•
...