Kia Cadenza: Automatic transmission operation / Paddle shifter

Kia Cadenza YG 2016-2025 Owners Manual / Driving your vehicle / Automatic transmission / Automatic transmission operation / Paddle shifter

The paddle shifter is available when the shift lever is in the D position or the manual mode.

With the shift lever in the D position

The paddle shifter will operate when the vehicle speed is more than 6mph (9km/h).

Pull the [+] or [-] paddle shifter once to shift up or down one gear and the system changes from automatic mode to manual mode.

When the vehicle speed is lower than 5mph (8km/h), if you depress the accelerator pedal for more than 5 seconds or if you shift the shift lever from D (Drive) to manual mode and shift it from manual mode to D (Drive) again, the system changes from manual mode to automatic mode.

With the shift lever in the manual mode

Pull the [+] or [-] paddle shifter once to shift up or down one gear.

✽ NOTICE

If you pull the [+] and [-] paddle shifters at the same time, you cannot shift the gear.

Transmission ranges
The indicator in the instrument cluster displays the shift lever position when the ENGINE START/STOP button is in the ON position. P (Park) Always come to a complete stop before shifting int ...

Shift lock system
For your safety, the automatic transmission has a shift lock system which prevents shifting the transmission from P (Park) into R (Reverse) unless the brake pedal is depressed. To shift the t ...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: Special Service Tools


Special Service Tools ItemIllustrationApplicationFuel Pressure Gauge(09353-24100)Measuring the fuel line pressureFuel Pressure Gauge Adapter(09353-02100)Connection between the high pressure fuel pump and the fuel feed lineHeated Oxygen Sensor Socket Wrench(09392-1Y100)Removal and installation o ...

Kia Cadenza YG 2016-2025 Service Manual: Fuel Pump Motor Repair procedures


Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the electric pump wiring connector (A) and the fuel sender connector (B). 3. Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup. 4. Remo ...

Copyright © www.kcadenzavg.com 2017-2025