Kia Cadenza: Automatic transmission / Automatic transmission operation

Kia Cadenza YG 2016-2024 Owners Manual / Driving your vehicle / Automatic transmission / Automatic transmission operation

The automatic transmission has 8 forward speeds and one reverse speed. The individual speeds are selected automatically, depending on the position of the shift lever.

✽ NOTICE

The first few shifts on a new vehicle, if the battery has been disconnected, may be somewhat abrupt. This is a normal condition, and the shifting sequence will adjust after shifts are cycled a few times by the TCM (Transmission Control Module) or PCM (Powertrain Control Module).

For smooth operation, depress the brake pedal and the lock release button when shifting from N (Neutral) to a forward or reverse gear.

WARNING - Leaving Vehicle

Before leaving the driver’s seat, always make sure the shift lever is in the P (Park) position; then set the parking brake fully and shut the engine off. Do not use the P position in place of the parking brake. Always make sure the shift lever is locked in the P position and set the parking brake fully. Unexpected and sudden vehicle movement can occur if these precautions are not followed.

CAUTION - Transmission

To avoid damage to your transmission, do not accelerate the engine in R (Reverse) or any forward gear position with the brakes on. The transmission may be damaged if you shift into P (Park) while the vehicle is in motion.

When stopped on an incline, do not hold the vehicle with the engine power. Use the service brake or the parking brake.

Automatic transmission
...

Transmission ranges
The indicator in the instrument cluster displays the shift lever position when the ENGINE START/STOP button is in the ON position. P (Park) Always come to a complete stop before shifting int ...

Other information:

Kia Cadenza YG 2016-2024 Service Manual: Barometric Pressure Sensor (BPS) Description and Operation


Description Barometric Pressure Sensor (BPS) is a speed-density type sensor and is installed on the air cleaner assemby. It senses absolute pressure of the air cleaner assemby and transfers the analog signal proportional to the pressure to the ECM. By using this signal, the ECM calculates ...

Kia Cadenza YG 2016-2024 Service Manual: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications


Specification Item SpecificationControl typeN/H (Normal High)Control pressure kpa (kgf/cm², psi)"500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)"Current value (mA)50 ~ 850Coil resistance(Ω)5.1 ± 0.3 ...

Copyright © www.kcadenzavg.com 2017-2024