Kia Cadenza: Light bulbs / Rear side marker (LED type)
bulb replacement
![](images/rear_side_marker_led_type_bulb_replacement-1283/904/pages.62(4).jpg)
If the rear side marker (LED type) (1)
does not operate, have the vehicle
checked by an authorized Kia dealer.
The LED lamp cannot be replaced
as a single component because it is
an integrated unit. The LED lamp has
to be replaced with the unit.
A skilled technician should check or
repair the rear side marker (LED
type), for it may damage related
parts of the vehicle.
1. Open the trunk lid.
2. Open the service cover.
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the a ...
If the high mounted stop lamp (LED
type) (1) does not operate, have the
vehicle checked by an authorized Kia
dealer.
The LED lamp cannot be replaced
as a single component because it is
an ...
Other information:
Removal and Installation
Engine Mounting Bracket
1.
Disconnect the battery negative terminal.
2.
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly – “Engine Room Under Cover”)
3.
Install the jack to the edge of the upper oil pan to support the engine.
...
Inspection
1.
Open the fuel filler door and remove the fuel filler door release actuator (A) after loosening the mounting bolts.
2.
Remove the trunk room left side trim.
(Refer to Body - "Interior Trim")
3.
Disconnect the release actuator connector (A).
4.
Check for continuity betwe ...