Kia Cadenza: Crankcase Emission Control System / Repair procedures

Kia Cadenza YG 2016-2025 Service Manual / Emission Control System / Crankcase Emission Control System / Repair procedures

Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Inspect the PCV vlave operation.
(1)
Run the engine at idle.
(2)
Put a finger on the open end of the PCV valve.
(3)
Make sure that intake manifold vaccum can be felt.
   
The plunger inside the PCV valve will move back and forth at vacuum.

4.
If the vacuum is not felt, clean or replace the vapor hose.
Schematic Diagrams
Schematic Diagram ...

Positive Crankcase Ventilation (PCV) Valve Description and Operation
Operation Principle ...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: Line Pressure Control Solenoid Vale Repair procedures


Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Measure the resistance between power terminal (5) and signal terminal (17). Specification : 5.1 ± ...

Kia Cadenza YG 2016-2025 Service Manual: Specifications


Specifications ItemsSpecificationHoodTypeRear hinged, gas lifter typeFront DoorConstructionFront hinged, full door constructionRegulator systemWire drum typeLocking systemPin-fork systemRear DoorConstructionFront hinged, full door constructionRegulator systemWire drum typeLocking systemPin-fork ...

Copyright © www.kcadenzavg.com 2017-2025