Kia Cadenza: Lighting System / Rheostat Repair procedures

Kia Cadenza YG 2016-2025 Service Manual / Body Electrical System / Lighting System / Rheostat Repair procedures

Inspection

1.	Disconnect the negative (-) battery terminal.

2.	Remove the passenger compartment juction box cover.

3.	Remove the side cover (A).

Remove the crash pad side switch assembly (A) by pushing it through side cover hole.

Put on gloves to protect your hands.

5.	Disconnect the rheostat connector (A) from lower crash pad switch.

6.	Operate the rheostat switch and check for continuity between terminals.

Hazard Lamp Switch Repair procedures

Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the center fascia panel (A) with hazard lamp switch. Apply the protective tapes to the center fa ...

Front Fog Lamps Repair procedures

Inspection 1. Disconnect the negative(-) battery terminal. 2. Remove the lighting switch of the multi-function switch. (Refer to the multi-function switch) 3. With the front fog lamp switc ...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: Repair procedures

On-vehicle Inpection • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide) • Check that the battery cables are connected to ...

Kia Cadenza YG 2016-2025 Service Manual: Schematic Diagrams

MDPS Circuit Diagram Harness Connector TypePin NoDescriptionBattery1Battery +2Battery -Vehicle1IGN2-3-4-5-6-7High_CAN8Low_CAN ...