Kia Cadenza: Body (Interior and Exterior) / Specifications
Kia Cadenza YG 2016-2025 Service Manual / Body (Interior and Exterior) / Specifications
| Specifications |
| Items | Specification | |
| Hood | Type | Rear hinged, gas lifter type |
| Front Door | Construction | Front hinged, full door construction |
| Regulator system | Wire drum type | |
| Locking system | Pin-fork system | |
| Rear Door | Construction | Front hinged, full door construction |
| Regulator system | Wire drum type | |
| Locking system | Pin-fork system | |
| Trunk Lid | Type | Torsior bar type |
| Seat Belts | Front | 3 point type with Emergency Locking Retractor (E.L.R) |
| Rear | 3 point type with Emergency Locking Retractor (E.L.R) 2 point type | |
| Tightening Torque |
| Items | N.m | Kgf.m | lb-ft | |
| Front and rear doors | Door hinge to body | 33.3 ~ 41.2 | 3.4 ~ 4.2 | 24.6 ~ 30.4 |
| Door hinge to door | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 | |
| Door checker to door | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Door checker to body | 16.7 ~ 21.6 | 1.7 ~ 2.2 | 12.3 ~ 15.9 | |
| Door glass mounting bolt | 3.9 ~ 2.9 | 0.4 ~ 1.2 | 11.8 ~ 8.7 | |
| Outside handle base mounting bolt | 0.7 ~ 0.5 | 0.07 ~ 0.1 | 1.0 ~ 0.7 | |
| Latch mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Door module mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Door striker mounting bolts | 16.7 ~ 21.6 | 1.7 ~ 2.2 | 12.3 ~ 15.9 | |
| Trunk lid | Trunk lid hinge to body | 6.9 ~ 8.8 | 0.7 ~ 0.9 | 5.1 ~ 6.5 |
| Trunk lid hinge to trunk lid | 6.9 ~ 8.8 | 0.7 ~ 0.9 | 5.1 ~ 6.5 | |
| Trunk lid latch mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Trunk lid striker mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Hood | Hood hinge to body | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 |
| Hood hinge to hood | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 | |
| Hood latch to body | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| Seat | Front seat mounting bolts | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |
| Front seat frame mounting bolts | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 | |
| Rear seat mounting bolts | 16.7 ~ 25.5 | 1.7 ~ 2.6 | 12.3 ~ 18.8 | |
| Seat belt | Height adjuster mounting bolts | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 |
| Front seat belt upper anchor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Front seat belt retractor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Rear seat belt lower anchor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Rear seat belt retractor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Seat belt buckle mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Outside rearview mirror | Outside rearview mirror mounting nuts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 |
| Panoramaroof | Panoramaroof mounting nuts | 19.6 ~ 29.4 | 2.0 ~ 3.0 | 14.5 ~ 21.7 |
Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUse09861-31100Sealant cut-out toolCutting windshield sealant(use with 09861-31200)09861-31200Sealant cutting bladeCutting windshield seala ...
Other information:
Kia Cadenza YG 2016-2025 Owners Manual: Warning message
When the sensor lens cover is blocked with dirt, snow, or debris, Smart Cruise Control operation may stop temporarily. If this occurs, a warning message will appear on the LCD display. Remove any dirt, snow, or debris and clean the radar sensor lens cover before operating Smart Cru ...
Kia Cadenza YG 2016-2025 Service Manual: Front Wiper Motor Repair procedures
Removal 1. Loosen the windshield wiper arm nut (B) after removing a wiper cap (A). 2. Remove the windshield wiper arm and blade (A). 3. If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm. 4. Disconnect the wa ...
Copyright © www.kcadenzavg.com 2017-2025
