Kia Cadenza: Front seat adjustment - power / Cushion extension
(for driver's seat)

To move the front part of cushion forward:
1. Push the front part of control
switch to move the seat cushion to
the desired length.
2. Release the switch once the seat
cushion reaches the desired length.
To move the front part of cushion
rearward:
1. Push the rear part of control
switch to move the seat cushion to
the desired length.
2. Release the switch once the seat
cushion reaches the desired
length.
Push the control switch forward or
backward to move the seat to the
desired position. When the control
switch is operated forward, the seat
cushion is slightly raised, and the
seat cushion ...
Push the control switch forward or
backward to move the seatback to
the desired angle. Release the
switch once the seat reaches the
desired position. ...
Other information:
EPB Circuit Diagram
EPB connector input/output
Pin No.Description1CAN_High2CAN_Low18IGN (+)19EPB Switch Signal 121EPB Switch Signal 327EPB Switch Signal 229EPB Switch Signal 433Rear Left Motor (-)34Ground35Ground36Rear Right Motor (-)37Rear Right Motor (+)38Rear Left Motor (+)39Battery (Rear R ...
Description
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors in
engine control system, so it consists of the two sensors which adapt
individual sensor power ...