Kia Cadenza: Air Conditioning System / Evaporator unit Description and Operation

Kia Cadenza YG 2016-2024 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Evaporator unit Description and Operation

Description

The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator freezing by excessive cooling.

A/C Pressure Transducer Repair procedures

Inspection 1. Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals. 2. Inspect the voltage value whether it is sufficient to be regular value ...

Evaporator unit Repair procedures

Inspection 1. Ignition "OFF". 2. Disconnect evaporator temperature sensor. 3. Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor. Spe ...

Other information:

Kia Cadenza YG 2016-2024 Service Manual: SRS Control Module (SRSCM) Repair procedures

Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console. (Refer to the Body group - console) 4. After removing the bolt (A), remove the rear vent duct (B). ...

Kia Cadenza YG 2016-2024 Service Manual: Compressor Repair procedures

Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative cable from the battery. 3. Recover the refrigerant with a recovery/charging station. 4. ...