| Inspection |
| 1. |
Open the junction box fuse cover. |
| 2. |
Insert the hand to the junction box fuse cover hole and remove the crash pad side switch assembly (A) by pushing it.
|
| 3. |
Disconnect the switch connector. |
| 4. |
Check for continuity between the terminal No.4 and No.5.
If there is no continuity, replace the fuel filler door open switch.
|
Inspection 1. Open the fuel filler door and remove the fuel filler door release actuator (A) after loosening the mounting bolts. 2. Remove the trunk room left side trim.
System Overview RPAS (Rear Parking Assist System) is an electronic driving aid that warns the driver to be cautious while parking or in low speed environments. The sensor uses ultrasonic waves to detect objects within proximity of the vehicle.
Diagnosis With GDS 1. BSD system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. 2. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.