Kia Cadenza YG: Body Electrical System / Fuses And Relays
- Components and Components Location
- Relay Box (Engine Compartment) Components and Components Location
- Relay Box (Engine Compartment) Repair procedures
- Relay Box (Passenger Compartment) Components and Components Location
- Relay Box (Passenger Compartment) Repair procedures
Inspection 1. Open the junction box fuse cover. 2. Insert the hand to the junction box fuse cover hole and remove the crash pad side switch assembly (A) by pushing it.
Component Location 1. Front deicer relay2. IGN2 relay3. Rain sensor relay4. Blower relay5. Burglar alarm horn relay6. Wiper relay7. IGN1 relay8. Cooling pan relay #19.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Repair procedures
Teaching Procedures 1. Key Teaching Procedure Key teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner. The procedure starts with an PCM(ECM) request for vehicle specific data (PIN code: 6digits) from the tester.
Kia Cadenza YG 2016-2021 Service Manual: Parking Assist Sensor Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 3. Disconnect the connector (A) from the parking assist sensor. 4. Pull out the sensor (A) by opening the sensor holder (B) out.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Body (Interior and Exterior)
- Mode Control Actuator Repair procedures
- General Information
- New on site
- Most important about car
