Kia Cadenza: Intake And Exhaust System / Intake Manifold Components and Components Location

Kia Cadenza YG 2016-2024 Service Manual / Engine Mechanical System / Intake And Exhaust System / Intake Manifold Components and Components Location

Components

1. Intake manifold

Surge Tank Repair procedures
Removal and Installation     To avoid damage, unplug the wiring connectors carefully while holding the connector portion.     Mark all wiring a ...

Intake Manifold Repair procedures
Removal and Installation 1. Remove the surge tank. (Refer to Intake And Exhaust System - "Surge Tank") 2. Remove the low pressure fule line. (Refer to Fuel System - "Fuel Line") 3. Rem ...

Other information:

Kia Cadenza YG 2016-2024 Service Manual: Drive Belt Repair procedures


Removal and Installation 1. Disconnect the battery negative terminal. 2. To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A).     When installing the drive belt, follow the below order. crankshaft pulley ...

Kia Cadenza YG 2016-2024 Service Manual: Fuel Pressure Control Valve (FPCV) Repair procedures


Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel pressure regulator valve terminals 1 and 2. 4. Check that the resistance is within the specifica ...

Copyright © www.kcadenzavg.com 2017-2024