Kia Cadenza YG: Cooling System / Components and Components Location

Kia Cadenza YG 2016-2021 Service Manual / Engine Mechanical System / Cooling System / Components and Components Location

Components

1. Cooling fan
2. Cooling fan motor
3. Cooling fan shroud
4. Resistor
5. Radiator assembly
6. Mounting insulator
7. Radiator upper hose
8. Radiator lower hose
9. Reservoir tank
10. Over flow hose
11. ATF cooler hose

    Engine Overheat Troubleshooting Inspection RemedyVisual inspectionInspect for shortage of coolant in reservoir tank .Reinspect after replenishing coolant.

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Start/Stop Button Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screw driver or remover, remove the center fascia lower panel (A). 3. Remove the in-car hose (A) and disconnect the connectors (B) from the heater & A/C control unit. 4.

    Kia Cadenza YG 2016-2021 Service Manual: Compressor Repair procedures

    Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative cable from the battery. 3. Recover the refrigerant with a recovery/charging station.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.024