Kia Cadenza YG: Hydraulic System / Description and Operation

Kia Cadenza YG 2016-2021 Service Manual / Automatic Transaxle System / Hydraulic System / Description and Operation

Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

    Components Location 1. Automatic transaxle2. Valve body assembly3. Oil pump assembly

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Antenna Coil Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A) after loosening the screw.

    Kia Cadenza YG 2016-2021 Service Manual: Description and Operation

    Description BSD is a system that uses two magnetic wave radar sensors attached on the rear bumper to measure the distance from the following vehicles and provides the sensing and (visual and auditory) alarm of any vehicle coming into the blind spot.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0198