Kia Cadenza YG: Auto Lighting Control System / Specifications

Kia Cadenza YG 2016-2021 Service Manual / Body Electrical System / Auto Lighting Control System / Specifications

Specifications
Items
Specifications
Rated voltage
DC +5V
Load
Max. 1mA (When head lamp lighting)
Illuminations
Tail lamp
ON : 0.52 ± 0.03 (V)
OFF : 1.58 ± 0.05 (V)
Head lamp
ON : 0.52 ± 0.03 (V)
OFF : 1.58 ± 0.05 (V)

    Component Location 1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Tail lamps5. IPM (Intelligent intergrated Platform Module)

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Auto Head lamp leveling Unit Repair procedures

    Removal Height Sensor 1. Remove the height sensor connector (A). 2. Loosen the mounting bolts(Body: 2EA, chassis: 1EA) from height sensor bracket. Tightening torque : 3 ~ 5N.m (30 ~ 50kgf.m, 2.21 ~ 3.68lb-ft) 3. Remove the height sensor.

    Kia Cadenza YG 2016-2021 Service Manual: Blower Unit Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower unit.(Refer to HA group – heater unit). 3. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 3 screws.     Make sure that there is no air leaking out of the blower and duct joints.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.024