Kia Cadenza YG: Body Electrical System / Auto Lighting Control System
- Specifications
- Components and Components Location
- Schematic Diagrams
- Auto Light Switch Repair procedures
- Auto Light Sensor Repair procedures
Troubleshooting 1. The lamp switch inputs can be checked using the GDS. 2. To check the input value of lamp switch, select option "IPM". 3. To consult the present input/output value of IPM, "Current DATA".
Specifications ItemsSpecificationsRated voltageDC +5VLoadMax. 1mA (When head lamp lighting)IlluminationsTail lampON : 0.52 ± 0.03 (V)OFF : 1.58 ± 0.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Blind Spot Detection Variant Coding Description and Operation
Description The used radar frequency of BSD is two, "North America region" and "Except North America region". If it replaces BSD unit, BSD unit has to perform the procedure of variant coding. BSD Variant Coding 1. Select the "BSD Variant Coding" procedure in BSD system.
Kia Cadenza YG 2016-2021 Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque : 9.8~14.7N.m (1.0~1.5kgf.m, 7.2~10.8 lb-ft) 2. Remove the desiccant (A) from condenser using a long nose plier.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Transaxle Control Module (TCM) Repair procedures
- Engine Electrical System
- Restraint
- New on site
- Most important about car
