| Description |
| • |
SS-A solenoid valve is ON/OFF type. |
| • |
When TCM supplies variable current to solenoid valve, speed range is changed by operating the solenoid valve. |

| SS-A | |
| N, P | ● |
| 1 | Δ |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| R | ● |
Components Location 1. SS-A Solenoid Valve (ON/OFF)
Circuit Diagram
Replacement 1. Discharge refrigerant from refrigeration system. 2. Replace faulty tube or hose. Cap the open fittings immediately to keep moisture or dirt out of the system. 3. Tighten joint of bolt or nut to specified torque.
Inspection 1. Measure terminal - to - terminal resistance of blower resistor. 2. If measure resistance isnot within specification, the blower resistor must be replaced. Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower cover (A) and then disconnect the connector (B).