Kia Cadenza YG: Engine Control System / Variable Intake Solenoid (VIS) Valve Description and Operation

Kia Cadenza YG 2016-2021 Service Manual / Engine Control / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve Description and Operation

Description
Variable Intake manifold Solenoid (VIS) valves are installed on the intake manifold (VIS Valve 1) and the surge tank (VIS Valve 2). These VIS valve 1 and 2 control vacuum modulators which activate valves in the intake manifold and the surge tank. These valves are opened or closed by ECM according to engine condition (Refer to below table).

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4.

    Specification ItemSpecificationCoil Resistance (Ω)30.0 ~ 35.0 [20°C(68°F)]

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Special Service Tools

    S

    Kia Cadenza YG 2016-2021 Service Manual: Heater Unit Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/ recycling/ charging station. 3. When the engine is cool, drain the engine coolant from the radiator. 4. Remove the expansion valve cover (A).

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0198