Kia Cadenza: SRSCM / Occupant Detection System (ODS) Description and Operation
In order to make normal activation of airbag system, SRSCM
detects DTC(s) for the Passenger side Body Detection System. If the seat
is occupied, Body sensor detects how measuring electrostatic capacity
and send signal to SRSCM via CAN.
SRSCM recognizes the signal as 2(two) different
classifications; that is, class #1 (Empty or child seat), class #2
(Small, Large).
With these signal, ACU determines whether it needs to deploy PAB(Passenger Airbag) or not.
If you strike or spin the SRSCM with the IG “ON”, the
seat-belt pretensioner, curtain-airbag or side-airbag could be deployed.
Handle it with care. |
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat")
3.
Disconne ...
Other information:
Description
The fuel pump control module (FPCM) is installed on the right
side of the fuel tank and controls the DC motor mounted inside the low
pressure fuel pump.
The module compares instantaneous fuel pressure information
measured by the fuel pressure sensor (FPS) with target fuel press ...
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the roof trim.
(Refer to Body - "Roof Trim")
3.
Disconnect the connector of high mounted stop lamp.
4.
Remove the high mounted stop lamp (B) after removing the bolts (2EA).
Installation
1.
Install the high mounte ...