Kia Cadenza: Detecting Sensor (front view
camera/front radar) / Smart Cruise Control malfunction
message
The message will appear when the
headway control is not functioning
normally.
Take your vehicle to an authorized
Kia dealer and have the system
checked.
CAUTION
- Do not install accessories
around the sensor and do not
replace the bumper by yourself.
It may interfere with the
sensor performance.
- Always keep the sensor and
bumper clean.
- Use only a soft cloth to wash
the vehicle. Do not spray pressurized
water directly on the
sensor or sensor cover.
- Be careful not to apply unnecessary
force on the radar sensor
or sensor cover. If the sensor
is forcibly moved out of
proper alignment, Smart
Cruise Control may not operate
correctly. In this case, a
warning message may not be
displayed.
Have the system checked by
an authorized Kia dealer.
- Do not damage the sensor or
sensor area by a strong
impact. If the sensor moves
slightly off position, Smart
Cruise Control will not operate
correctly without any warning
or indicator from the cluster.
If this occurs, have your vehicle
checked by an authorized
Kia dealer as soon as possible.
- Use only a genuine Kia sensor
cover for your vehicle. Do not
paint anything on the sensor
cover.
- If the front bumper becomes
damaged in the area around
the radar sensor, Smart Cruise
Control may not operate properly.
- To prevent sensor cover damage
from occurring, wash the
car with a soft cloth.
- Do not tint the window or
install stickers, accessories
around the inside mirror
where the camera is installed.
- Make sure the frontal camera
installation point does not get
wet.
- Do not place reflective
objects(white paper or mirror
etc.) on the crash pad. FCA
may activate unnecessarily
due to reflect of the sunlight.
- Do not impact or arbitrarily
remove any front view camera
components.
When the sensor lens cover is
blocked with dirt, snow, or debris,
Smart Cruise Control operation may
stop temporarily. If this occurs, a
warning message will appear on the
LCD display. Rem ...
The driver may choose to only use
the cruise control mode (speed control
function) by doing as follows:
1. Turn Smart Cruise Control on (the
cruise indicator light will be on but
the syst ...
Other information:
Special Service Tools
ItemIllustrationApplicationFuel Pressure Gauge(09353-24100)Measuring the fuel line pressureFuel Pressure Gauge Adapter(09353-02100)Connection between the high pressure fuel pump and the fuel feed lineHeated Oxygen Sensor Socket Wrench(09392-1Y100)Removal and installation o ...
Removal
1.
Air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
2.
Battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Dissconnect the solenoid valve connector (A) and inhibitor switch connector (B).
4.
Remove the control c ...