Kia Cadenza: Heating,Ventilation, Air Conditioning / Special Service Tools

Kia Cadenza YG 2016-2025 Service Manual / Heating,Ventilation, Air Conditioning / Special Service Tools

Special Service Tools
Tool (Number and name)
Illustration
Use
09977-3R000
Disc & hub assembly bolt remover

Removal and installation of limiter assembly.

Troubleshooting
Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor. ...

Air Conditioning System
...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: Rear Assist Arm Repair procedures


Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolts when removing the rear wheel & tire. 2. Remove the sprit pin and castle nut and then dis ...

Kia Cadenza YG 2016-2025 Service Manual: Barometric Pressure Sensor (BPS) Repair procedures


Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the barome ...

Copyright © www.kcadenzavg.com 2017-2025