Kia Cadenza YG: Audio / Specifications
| Specification |
| Item | Specification | |
| Model | RADIO/CD/MP3 (PA30B) | |
| Power supply | DC 14.4V | |
| Rated output | Max 43W x 4 | |
| Impedanec (Ω) | 4 ohm x 4 | |
| Antenna | 80PF 75Ω | |
| Tuning type | PLL synthesized type | |
| Other | Internal amplifier | |
| Frequency range / Channel space | FM | 87.5 ~ 107.9 MHz/200 KHz |
| AM | 530 ~ 1710 KHz/10 KHz | |
| Item | PA30B | ||
| Input power (W or V) | Front | MAX 50W | |
| Rear | MAX 50W | ||
| Front tweeter | MAX 40W | ||
| Impedance (Ω) | Front | 4 ± 0.6 | |
| Rear | 2.0 ± 0.3 | ||
| Front tweeter | 3.4 ± 0.5 | ||
| Number of speaker | 6 | ||
Component Location 1. Audio unit2. Front tweeter speaker3. Glass antenna amplifier (Diversity type)4. Front door speaker5. Rear speaker6. Antenna feeder cable7.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Description and Operation
Description System Operation Typically, lane departure warning is activated at a speed over 70 KPH, but suppressed in case of unintentional lane departure when driver do not operate turn signal. System Operation Conditions 1. User Conditions (1) When unintended lane departure is occured, warnings are generated.
Kia Cadenza YG 2016-2021 Service Manual: Blind Spot Detection Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting screws. Take care not to separate the bracket from rear bumper when removing the BSD sensor.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Specifications
- Engine Electrical System
- Body (Interior and Exterior)
- New on site
- Most important about car
