Kia Cadenza: Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation

Kia Cadenza YG 2016-2025 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation

Description

•	26 Brake control solenoid valve is a Variable Force Solenoid (VFS) type.

•	When TCM supplies variable current to solenoid valve, hydraulic pressure of 26 brake is controlled by solenoid valve.

26 Brake control solenoid valve operation table

	26/B_VFS
	N/L
N, P
1
2	●
3
4
5
6	●
R

● : Connected status

26 Brake Control Solenoid Valve(26/B_VFS) Components and Components Location

Component Location 1. 26 Brake control solenoid valve (26/B_VFS) ...

26 Brake Control Solenoid Valve(26/B_VFS) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: Fuel Tank Pressure Sensor (FTPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the floor mat in the trunk. 3 ...

Kia Cadenza YG 2016-2025 Owners Manual: System description

Rear Cross-Traffic Collision Warning Rear Cross-Traffic Collision Warning uses rear corner radar sensors to monitor the approaching cross traffic from the left and right side of the vehicle when your vehicle is in reverse. The warning distance varies relative to the approaching veh ...