Kia Cadenza: Warning message and control / Blind-Spot Collision-Avoidance Assist

Kia Cadenza YG 2016-2024 Owners Manual / Driving your vehicle / Blind-Spot Collision Warning (BCW)/ Blind-Spot Collision-Avoidance Assist (BCA) / Warning message and control / Blind-Spot Collision-Avoidance Assist

Blind-Spot Collision-Avoidance Assist may apply braking power, when an approaching vehicle is detected within a certain distance next to/behind your vehicle.

It gently applies braking power on the tire, which is located in the opposite side of the possibly-colliding point. The instrument cluster will inform the driver of the system activation.

Blind-Spot Collision-Avoidance Assist is automatically deactivated when:

- When the vehicle is deviated over a certain distance from its driving lane.
- The vehicle direction is changed against the possible-colliding point
- The steering wheel is abruptly moved
- The brake pedal is depressed
- After a certain period of time

The driver should drive the vehicle in the middle of the vehicle lanes to keep the system in the ready status.

When the vehicle drives too close to one side of the vehicle lanes, the system may not properly operate.

In addition, the system may not properly control your vehicle in accordance with driving situations. Thus, always pay close attention to road situations.


Blind-Spot Collision Warning
First stage alert If a vehicle is detected within the boundary of the system, a warning light will illuminate on the outside rearview mirror. Once the detected vehicle is no longer within ...

Detecting Sensor (front view camera/ rear corner radars)
Front view camera The front view camera is a sensor detecting the lane. If the front view camera is covered by heavy rain, heavy snow and fog or foreign objects, dust, the system may tempor ...

Other information:

Kia Cadenza YG 2016-2024 Service Manual: Troubleshooting

Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptomProbable causeRemedyThe set vehicle speed varies greatly upward or downward"Surging" (repeated alternating acceleration and deceleration) occurs after settingMalfunction of the vehicle speed sensor circuitRepair the v ...

Kia Cadenza YG 2016-2024 Service Manual: Transaxle Control Module (TCM) Repair procedures

Removal     When replacing the TCM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used TCM] 1) Perform "TCM Neutral mode" procedure with GDS. (Refer to Body Electrical System - "Immobilizer System") 2) ...

Copyright © 2017-2024