Kia Cadenza YG: Evaporative Emission Control System / Description and Operation
Kia Cadenza YG 2016-2021 Service Manual / Emission Control System / Evaporative Emission Control System / Description and Operation
| Description |
Evaporative Emission Control System prevents fuel vapor
stored in fuel tank from vaporizing into the atmosphere. When the fuel
evaporates in the fuel tank, the vapor passes through vent hoses or
tubes to canister filled with charcoal. The canister temporarily holds
the vapor in the charcoal. If ECM determines to draw the gathered vapor
into the combustion chambers during certain operating conditions, it
will vacuum into intake manifold.
Schematic Diagram Canister Canister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when appropriate conditions are set.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Cluster ionizer Repair procedures
Inspection 1. Press the OFF switch more then 4 times within 2 seconds while pressing the MODE switch. DisplayFail description00Normal50Cluster ionizer fault * Diagnostic procedure refer to DTC code. Replacement 1. Disconnect the negative (-) battery terminal.
Kia Cadenza YG 2016-2021 Service Manual: Power Mosfet Repair procedures
Inspection 1. Ignition "ON" 2. Manually operate the control switch and measure the voltage of blower motor. 3. Select the control switch to raise voltage until high speed. Specification FanMotor VoltageManualFirst speed3.8 ±0.5VSecond speed5.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Driveshaft and axle
- Timing Chain Repair procedures
- Body Electrical System
- New on site
- Most important about car
Copyright © 2026 www.kcadenzavg.com - 0.0228