Kia Cadenza YG: Seat Belt Pretensioner / Emergency Fastening Device (EFD) Description and Operation

Kia Cadenza YG 2016-2021 Service Manual / Restraint / Seat Belt Pretensioner / Emergency Fastening Device (EFD) Description and Operation

Description
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver and passenger seat and it is an equipment to make up for the existing short stroke. EFD is supported by two cables and it is an auxiliary equipment to prevent a driver and passenger from breaking away doubly as seat belt is being pulled toward anchor side after a collision.
   
Never measure resistance of EFD directly, Current of measuring device may cause unexpected airbag deploy.

    Removal 1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. 2. The seat belt emergency fastening device (A) be removed after pushing the lock pin (B) as arrow direction.

    Components

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Adaptive Front Lighting System Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the crash pad side cover (A). [RH] 3. Disconnect the stopper (B) from the glove box (A). 4. Disconnect the air damper (A) from the glove box (B).

    Kia Cadenza YG 2016-2021 Service Manual: Parking Assist Sensor Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 3. Disconnect the connector (A) from the parking assist sensor. 4. Pull out the sensor (A) by opening the sensor holder (B) out.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0553