Kia Cadenza YG: Seat Belt Pretensioner / Emergency Fastening Device (EFD) Components and Components Location
| Components |
Description Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision.
Removal 1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. 2. The seat belt emergency fastening device (A) be removed after pushing the lock pin (B) as arrow direction.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Parking Assist Sensor Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 3. Disconnect the connector (A) from the parking assist sensor. 4. Pull out the sensor (A) by opening the sensor holder (B) out.
Kia Cadenza YG 2016-2021 Service Manual: Photo Sensor Repair procedures
Inspection 1. Ignition "ON" 2. Using the scan tool. 3. Emit intensive light toward photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and reduce with lower intensive light.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Battery Troubleshooting
- Body (Interior and Exterior)
- Timing Chain Repair procedures
- New on site
- Most important about car
