Kia Cadenza YG: Surround View Monitoring (SVM) System / Surround View Monitoring Unit Repair procedures

Kia Cadenza YG 2016-2021 Service Manual / Body Electrical System / Surround View Monitoring (SVM) System / Surround View Monitoring Unit Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
3.
Remove the SVM unit (B) after disconnecting the connectors (A) and mounting bolts.

Installation
1.
Install the SVM unit.
2.
Install the glove box housing and glove box.
3.
Connect the negative (-) battery terminal.

    Components

    Components

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Description and Operation

    Description The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer system aims to drastically reduce the rate of auto theft.

    Kia Cadenza YG 2016-2021 Service Manual: Mode Control Actuator Repair procedures

    Inspection 1. Ignition "OFF” 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to the terminal 3and grounding terminal 7. 4. Verify that the mode control actuator operates to the vent mode when connecting in the reverse.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0288